is here! Shop now, pay later in 4 easy installments
VIOFO VS1 Mini User Manual & Troubleshooting Guide
VIOFO VS1 Mini acting up? Lost the booklet? No stress.
Welcome to your one-stop digital guide for the VIOFO VS1 Mini. Whether you're trying to figure out what that flashing red light means, or you just want to set up the voice commands properly, we've got you sorted below.
Pro Tip: The Hardwire Kit Gotcha
Planning to use Parking Mode? While the VS1 Mini uses a USB-C port, not all kits fit perfectly. The standard HK4 kit works, but the connector is a bit long and leaves metal exposed. For a flush, factory-look finish, make sure you grab the specific VIOFO HK5 Hardwire Kit.
Troubleshooting & Voice Commands
The VS1 Mini doesn't have a screen, so it talks to you via LEDs and Voice Notifications. Here is the cheat sheet to understand what it's saying.
| Feature | Status / Command | Meaning / Action |
|---|---|---|
| REC LED | Solid Red | Normal Recording. |
| REC LED | Flashing Red | Not recording (Error, Menu open via App, or Emergency Lock). |
| MIC LED | Solid Blue | Audio Recording is ON. |
| Voice Command | "Take Photo" | Snaps a still image. |
| Voice Command | "Video Start" | Resumes recording if stopped. |
| Voice Command | "Turn On/Off Audio" | Toggles the microphone. |
| Voice Command | "Turn On/Off Wi-Fi" | Enables/Disables Wi-Fi hotspot. |
Common Questions (FAQ)
1. Why is my VS1 Mini beeping at me?
It's usually the memory card. Since there's no screen to show an error code, the beep is the distress signal. It likely means the card is full, too slow (Class 10 U3 is a must for 2K), or needs formatting. Format it via the VIOFO app and you should be sweet.
2. How do I reset the Wi-Fi password?
Can't connect? Forgotten the password? With the camera on, press the MIC button 5 times quickly. This will reset the Wi-Fi settings to default (usually `12345678`).
3. My hardwire kit is loose/showing metal?
You might be using the older HK4 (Type-C) kit. While it powers the unit fine, the plug is slightly longer than the VS1's port depth. It's cosmetic, but if it bugs you, the HK5 kit is designed specifically for the VS1's shallow port.
4. The camera feels hot, is that normal?
Yeah, no dramas there. The VS1 is tiny and packs a 2K Starvis 2 sensor—that generates heat. The casing is designed to dissipate that heat, so it will feel warm to the touch. Unless it's shutting down from overheating, it's operating normally.