Nissan Dash Cam Adapters | Easy Install for Patrol, Navara & X-Trail

Keep your Nissan’s interior clutter-free with a discrete power solution. While we’re ready for future releases like the PRO and Classic+ series, The Dash Cam Guys currently only stock the Dongar Classic (DCA-xxx series). It’s the easiest way to get ignition-switched power to your camera without messy cables or permanent modifications.

📍 Aussie Fitment Tip: The 10-pin (DCA-10A) is the "Golden Ticket" for Nissan. It fits the vast majority of our local lineup, including the Patrol, Navara, and X-Trail. If you have an older model (pre-2015, or not specifically listed below) or a base-trim vehicle with a smaller auto-dimming mirror, go for the 7-pin (DCA-7B) connector instead.

Patrol (Y62) 2013–2025 Ti, Ti-L, Warrior = DCA-10A

Navara (D23/NP300) 2015–2025 ST, ST-X, PRO-4X, Warrior = DCA-10A

X-Trail (T32 & T33) 2014–2025 ST-L, Ti, Ti-L, e-POWER = DCA-10A

Pathfinder (R52 & R53) 2013–2025 ST-L, Ti = DCA-10A

Qashqai (J11 & J12) 2014–2025 ST-L, Ti, e-POWER = DCA-10A

Z (RZ34) 2023–2025 All Trims = DCA-10A

Juke (F16) 2020–2025 ST-L, Ti = DCA-10A

Altima 2013–2017 All Trims with Auto-Dimming = DCA-10A

Older Nissan Models (Various) Models with "Economy" Auto-Dimming Mirrors = DCA-7B

10-pin Type A

Most common mirror used on Nissan/Infiniti. Example applications: GT-R, Z, Frontier, Altima, Sentra.

  • Car diagnostic tool with cable on a white background

    10-pin Type A

  • Gray plastic bag with multiple square holes on a white background
  • Close-up of a car diagnostic connector socket on a metallic surface.
  • Black electrical connector with wires on a white background
  • Close-up of a car wiring connector with a blurred natural background

7-pin Type B

Most common on older Nissan and some newer ones such as Frontier with basic autodimming mirrors.

  • USB adapter with wiring on a white background

    7-pin Type B

  • Outline of a keyboard with a toolbox on a white background
  • Close-up of a mechanical component with 'DAAV' branding on a blurred background
  • Close-up of a black electrical connector on a white background

12-pin Type A

This mirror is found on models + trim levels of Infiniti.

  • Car adapter with USB connector and wiring on a white background

    12-pin Type A

  • Outline of a rectangular container with a grid pattern on a white background
  • Close-up of a HDMI port on electronic equipment
  • Black electrical connector with multiple pins on a white background

NEED HELP? DON'T SEE YOUR RIDE?
CONTACT THE GUYS

Don't stress if your model isn't on the list yet - we’re constantly expanding our database. Shoot us an email with a clear photo of the connector behind your rearview mirror. We’ll help you confirm the fitment, and in return, you’ll help us build the definitive list for future drivers.

Snap a photo of the plug behind your mirror.

Email it to the team at gday@dashcamguys.com.au.

We’ll verify the match for you so you can buy with confidence!

SEND IT TO THE GUYS

Install your Dash Cam like a Pro

Load video:

Need help?

The type of adapter you need may differ based on your specific car model. To learn more about different connectors and installation methods, visit our help center at the link below

Put me through to 'The Guys'
Person holding a snake inside a vehicle

THE DONGAR DIFFRENCE

NO MORE HANGING WIRES

Dongar transforms your auto-dimming rearview mirror into a power source for your dash cam, allowing for a clean, out-of-site install.

PLUG-AND-PLAY

Our custom-made adapters offer a quick, plug-and-play solution, so you can install your dash cam in minutes and keep it running for miles.

SEAMLESS INSTALLATION

We give you everything you need for an easy installation–no special tools or car modding experience required.

See how it works