• VIOFO A129 rear mount with red 3M adhesive sticker for dash cam

VIOFO A129 Rear Camera Mount – 3M Adhesive, Normal (Non-IR) Version

In stock
$10.00
$10.00 RRP $0.00
Tax included. Shipping calculated at checkout.
  • Fully secure checkout
  • Local Australian Stock
  • "No-Worries" Returns
Need it installed?

Find a Verified Pro via 'Find an Installer'

Seen it cheaper?

We'll match it!* Reach out to us via Live Chat

Put the Rear Camera Back Where It Belongs. The genuine A129 rear mount with 3M adhesive

Rear mounts have a harder life than front ones. They sit against glass that gets a demister run through it, they cop the slam of a tailgate, and they are usually stuck on in a hurry at an awkward angle. When one lets go, the camera ends up dangling by its cable. This is the genuine replacement, with the adhesive already applied.

Trusted AU store: We're an authorised AU reseller, shipping from Melbourne within 24 hours*. You get a 12-month warranty on this accessory, local technical support, and our 30-Day No-Worries returns.

Who This Isn't For — important: VIOFO makes two versions of this mount, and they are not the same. This is the Normal rear mount, which fits the A129 Duo, A129 Pro Duo and A129 Plus Duo. The IR rear mount is a different part, so if you run an A129 Duo IR this is not the one you want. Check which rear camera you have before ordering, and message us if you are not sure.

DCG Score & Highlights

What We Love

  • Genuine VIOFO part, so the camera slides in and clicks home properly
  • 3M adhesive pre-applied, so there is nothing to cut or align yourself
  • Covers the A129 Duo, Pro Duo and Plus Duo in one part
  • The mount body is reusable even though the pads are single-use
  • Far cheaper than replacing a rear camera that is working fine

What Could Be Better

  • Not the IR version. VIOFO makes a separate rear mount for the A129 Duo IR and they are not interchangeable.
  • The adhesive pads are single-use, so a second repositioning needs fresh tape.
  • Rear glass often has a demister grid, which reduces the flat area available to bond to.

Why Rear Mounts Fail Before Front Ones

A front mount sits on flat glass in still air. A rear mount sits near a demister grid, takes the shock of the tailgate closing, and is usually fitted at arm's length through the back seats where it is hard to press properly. That combination is why the rear is almost always the mount that lets go first, and why it is worth taking the extra minute on surface prep when you refit it.

Top Benefits

  • Cheap repair: Restores a fallen rear camera without replacing the camera.
  • Adhesive included: Two 3M pads pre-applied, ready to fit.
  • Proper click-in fit: Genuine part, so the camera locks rather than wobbles.
  • Covers three models: A129 Duo, Pro Duo and Plus Duo.

Upgrade Your Rear Install Today

Add the A129 rear mount to your cart, checking first that you need the Normal version rather than the IR one. You may also want a replacement rear cable. Browse more in mounts and adhesives. Ships from Melbourne within 24 hours*, covered by our 30-Day No-Worries returns.

Specifications

Warranty
  • 12 Months

FAQ

  • Q: Will this fit my A129 front camera? → A: No. It is specifically for the A129 rear camera module.
  • Q: Can I reuse the adhesive? → A: No. Replace the pad whenever you remove the mount.
  • Q: How do I prep the glass? → A: Clean with isopropyl alcohol, let it dry fully, avoid installing below 15 °C or on dusty/greasy glass.
  • Q: Will it work on curved glass? → A: Yes, provided the area is reasonably flat and you apply firm, even pressure during install.
  • Q: Will the mount show through tint? → A: It is low-profile and usually hidden behind the upper tint band when placed high.
VIOFO A129 Rear Camera Mount – 3M Adhesive, Normal (Non-IR) Version

$10.00

Questions about this product?
Don't be a stranger.

Get in touch

Exclusive discounts, just for you. Sign up now.