WOLFBOX G900 TriPro Bumper Cam Caravan, Trailer & Float Kit

Run your WOLFBOX G900 TriPro bumper camera all the way to the caravan, trailer or horse float

You asked, we built it. This is the kit that lets you take your WOLFBOX G900 TriPro Bumper camera past the tow bar and onto whatever you're towing. Keep an eye on the trailer hitch, survey on the horses in the float, or watch the boat on the ramp, all from the mirror unit you already run up front. It turns your bumper cam into a caravan rear facing camera and trailer camera without hacking up your loom or living with a dodgy generic lead.

The camera that ships with the TriPro Bumper comes on roughly 6.4 metres of cable. That is plenty on a wagon and nowhere near enough once there is a drawbar and a van behind you. It also runs a 4-pin plug, where the rest of the WOLFBOX range and most reversing cameras use 6-pin, so the generic extension leads on the shelf will not fit it.

The kit is built around a Woza connection, the heavy-duty plug and socket Aussie tourers already trust for caravan and horse float cameras. A stretchy 2.5M Curly Cable bridges the gap between your vehicle and the trailer. Its weatherproof Woza plugs connect and disconnect just like a trailer plug, so hitching up and dropping off stays a ten-second job.

Trust DCG: Custom designed, sourced and road-tested by The Dash Cam Guys team, dispatched from Melbourne within 24 hours^*, backed by a 12-month warranty, local technical support and our 30-Day “No-Worries” return policy. See our Shipping & Returns pages or browse more WOLFBOX accessories.

Honest heads-up: this is a DCG-made kit, not a WOLFBOX part

Straight up, this is a non-genuine (aftermarket) accessory, built specifically to suit the WOLFBOX G900 TriPro Bumper camera (not included). We went and sourced a factory to make the exact thing customers kept asking us for, then tested it on real rigs before putting it on the shelf. You're getting DCG engineering and DCG support, not a mystery import.

What’s in the kit, part by part

There are four cables in the kit and each one has a single job. Here they are in the order they connect, starting at your vehicle and finishing at the camera.

1. 1M Woza Adapter (vehicle side): Plugs into the 4-pin camera lead at the back of your vehicle and ends in a Woza socket that you mount near the tow bar.
2. 2.5M Curly Cable: The coiled cable that crosses the gap between vehicle and trailer. It stretches as you turn, and it is the only part you plug in and unplug when you hitch and unhitch.
3. 1M Woza Adapter (trailer side): Ends in a matching Woza socket that you mount on the front of the trailer. Its other end plugs into the Trailer Cable.
4. Trailer Cable (either 6M, 10M or 15M): Runs along the trailer to wherever you mount the camera. This is the only part that changes between the three options above.

Mounting brackets for the two Woza sockets are in the box as well.

How the kit works

Your bumper camera uses a small 4-pin plug. The Curly Cable uses a larger, tougher 5-pin Woza plug that is made to be connected and disconnected outdoors, over and over. The two Woza Adapters are the go-betweens. One changes the small plug to the big one on the vehicle, and the other changes it back on the trailer. Everything pushes together by hand, with no cutting and no soldering.

The kit simply carries the camera's picture and power from one end to the other, so there is nothing to set up in the menu. Start the car and the TriPro sees the camera exactly as it did before.

Choosing your Trailer Cable length

Every kit comes with the same 2.5M Curly Cable and the same two 1M Woza Adapters. The only thing you choose is the Trailer Cable, which comes in three lengths. Measure the path the cable will actually take to the camera, around corners and along the chassis, then pick the length above.

• 6M: Box trailers, camper trailers, single horse floats and shorter vans.
• 10M: Full-size caravans, and anything where the camera lives at the far end of a long trailer.
• 15M: Big rigs. Tandem and triple-axle vans, two-horse angle-load floats, machinery trailers, and boat trailers where the camera sits back at the rollers.

Buy the length you need in one piece. Every extra join is another spot where water and vibration can get in, and it can weaken the picture over a long run. If you land between two sizes, go up one.

Who this isn’t for

This kit is for owners running the WOLFBOX G900 TriPro Bumper edition who want to extend that camera onto a towed caravan, trailer, boat or horse float. It is not a standalone camera. It does not suit the TriPro Cabin, G900 Pro, G890 or G850, which run 6-pin rear window cameras on a different plug. If you’re unsure which camera you own, send us a photo of your plug before ordering and we’ll confirm the fit.

DCG Score & Highlights

What We Love

• Connects your G900 TriPro bumper cam to a caravan, trailer or horse float, past the tow bar.
• Weatherproof Woza plugs that hitch and unhitch like a trailer plug.
• Three Trailer Cable lengths, so you buy the run you need without coiling spare metres behind a panel.
• No electronics inside to fail and nothing to set up.
• Custom-made and tested by The Dash Cam Guys team, with local support and mounting brackets in the box.

What Could Be Better

• This is an aftermarket (non-genuine) accessory rather than an official WOLFBOX part.
• Relies on your existing G900 TriPro Bumper camera and mirror unit to record. It does not include the camera itself.
• You need to measure your run before ordering, because the Trailer Cable length is a fixed length.

Why a proper towed-camera connection matters

Reversing a caravan or float blind is where the dings, the flattened bollards and the frayed tempers happen. Running your bumper camera through to the back of what you’re towing gives you a live, low, wide view exactly where you need it, and keeps that footage recording through your G900 TriPro. A cheap generic lead that corrodes or drops out at the worst moment defeats the point, which is why we chose weatherproof Woza plugs built for the job.

Top benefits of this Caravan, Trailer & Float Kit

• Extends your existing camera: No second system to buy, your WOLFBOX bumper cam does the work all the way to the trailer.
• Weatherproof and plug-and-play: The Woza plugs handle dust, rain and mud, and disconnect in seconds when you unhitch.
• Sized to your rig: Choose a 6M, 10M or 15M Trailer Cable to suit anything from a box trailer to a triple-axle van.
• Made for towing life: Ideal for caravans, camper trailers, boat trailers and horse floats on outback trips and around town.
• Tidy install: The two Woza Adapters and included mounting brackets mean no soldering and no guesswork.

Fitting tips

• Route the Trailer Cable along a chassis rail or inside a panel, and cable-tie it every half metre or so.
• Keep the plugs tucked up out of standing water and away from the exhaust.
• Mount the camera on something solid. A panel that drums over corrugations puts that movement straight into the video.

What’s in the box

• 1 x 1M Woza Adapter (vehicle side)
• 1 x 2.5M Curly Cable
• 1 x 1M Woza Adapter (trailer side)
• 1 x Trailer Cable in your chosen length: 6M, 10M or 15M
• Mounting brackets for the two Woza sockets

Check compatibility before you order

This kit suits the WOLFBOX G900 TriPro Bumper edition using the weatherproof 4-pin bumper camera connector. It does not fit the TriPro Cabin, the G900 Pro or other WOLFBOX models with 6-pin rear window cameras. Not sure? Email a photo of your camera plug to gday@dashcamguys.com.au and we’ll sort it before you buy.

Take your bumper cam past the tow bar today

Pick your Trailer Cable length above, add the WOLFBOX G900 TriPro Bumper Cam Caravan, Trailer & Float Kit to your cart and see behind whatever you’re towing. Fast dispatch from Melbourne within 24 hours^*, a 12-month warranty handled here, local support, and our 30-Day “No-Worries” returns.

Last updated: October 2026