• VIOFO VS1 double adhesive sticker mount with 3M VHB tape for dash cam reinstallation
  • Black VIOFO VS1 double adhesive sticker mount base with internal ridges for secure fit
  • VIOFO VS1 dash cam with red 3M adhesive mount sliding into black plastic housing

VIOFO VS1 Adhesive Sticker Mount – 3M, VS1 Camera Only

In stock
$16.00
$16.00 RRP $0.00
Tax included. Shipping calculated at checkout.
  • Fully secure checkout
  • Local Australian Stock
  • "No-Worries" Returns
Need it installed?

Find a Verified Pro via 'Find an Installer'

Seen it cheaper?

We'll match it!* Reach out to us via Live Chat

Get the VS1 Back on the Glass. The genuine 3M adhesive sticker mount, made for that camera only

The VS1 is a deliberately small camera, which means its mount is small too, and a small pad has less area to fight a hot windscreen with. Come February that is usually what lets go. This is the genuine replacement, so the camera seats and locks properly rather than sitting at a slight angle for the rest of its life.

Trusted AU store: We're an authorised AU reseller, shipping from Melbourne within 24 hours*. You get a 12-month warranty on this accessory, local technical support, and our 30-Day No-Worries returns.

Who This Isn't For: VIOFO's wording is unambiguous here: this is a double adhesive sticker mount for the VS1 camera only. It will not fit the A119, A129, A139, A229 or A329 ranges, each of which uses its own mount. Check the badge on your camera before ordering.

DCG Score & Highlights

What We Love

  • Genuine VIOFO part, so the VS1 clicks in properly rather than sitting loose
  • 3M adhesive already applied, with nothing to cut or align yourself
  • Keeps the low-profile fit the VS1 is bought for
  • Far cheaper than replacing a camera that is working fine

What Could Be Better

  • VS1 only, so it has no use if you change camera families later.
  • Adhesive bonds directly to glass and leaves residue on removal. Fit a static sticker underneath if you may reposition.
  • A smaller mount has less bonding area, so surface prep matters more than it does on a larger camera.

Why Surface Prep Matters Most on a Small Mount

A compact mount has less adhesive area to work with, which makes it far less forgiving of a dirty windscreen. Household glass cleaner leaves a surfactant film that tape cannot grip, so use isopropyl alcohol. Apply in the shade above 15 °C, press for a full 30 to 60 seconds, and leave it 24 hours before driving. That habit is the difference between a mount that lasts years and one that fails by Christmas.

Top Benefits

  • Cheap fix: Restores a fallen VS1 for a fraction of a new camera.
  • Correct fit: Genuine mount, so the camera locks rather than wobbles.
  • Stays discreet: Keeps the low profile the VS1 is chosen for.
  • Ready to fit: 3M adhesive already applied.

Upgrade Your Install Today

Add the VS1 adhesive mount to your cart, and a static sticker underneath for clean removal later. Pair it with the CPL-400 filter, which is also VS1-specific. Browse more in mounts and adhesives. Ships from Melbourne within 24 hours*, covered by our 30-Day No-Worries returns.

Specifications

Warranty
  • 12 Months

FAQ

  • Q: Will this fit other VIOFO models? → A: No. It’s shaped specifically for the VS1.
  • Q: How should I prep the glass? → A: Remove old adhesive, wipe with isopropyl alcohol, dry fully, apply once with firm pressure for 30–60 seconds, then allow a few hours to cure.
  • Q: Is it safe on aftermarket tint? → A: Designed for glass. If you must mount over tint, use a clear static disc between the tint and mount to avoid damage.
  • Q: Can I reuse the adhesive? → A: No. Replace with a new adhesive mount for best grip.
VIOFO VS1 Adhesive Sticker Mount – 3M, VS1 Camera Only

$16.00

Questions about this product?
Don't be a stranger.

Get in touch

Exclusive discounts, just for you. Sign up now.