Which WOLFBOX OBD Hardwire Kit Do I Need? The Clear Guide
Which WOLFBOX OBD Hardwire Kit Do I Need? The No-Fuss Aussie Guide
So, you've grabbed a WOLFBOX dash cam, top choice. If you want to catch the parking lot specials, you need to unlock Parking Mode. This guide breaks down which WOLFBOX OBD hardwire kit suits your specific model and vehicle.
Why You Shouldn't Just Use the Cigarette Socket
- Dangling Cables: It looks a bit ordinary.
- No Power when Parked: Most Aussie cars cut power to that socket the moment you take the keys out.
The Solution: An OBD-II Hardwire kit. It plugs straight into your car's diagnostic port. Plug and play, and it doesn't cut any wires, which is the thing dealers query most. You can browse the full range in our hardwire kits collection.
Which WOLFBOX Kit Fits Your Rig?
| Feature | WOLFBOX OBD01 (Standard) | WOLFBOX WBH40O (High-Power) |
|---|---|---|
| Power | 5V / 3A | 5V / 4A |
| Best For | G840S, G850, G930, G840H, X5, i07 | G900, G900 Pro, TriPro |
| Connector | USB-C | USB-C |
Expert Tip: Check the sticker on the back of your mirror cam. If it says 4A, you must grab the WBH40O kit.
Running a G900 Pro? Our WOLFBOX G900 Pro review shows how the camera and the 4A kit perform on Aussie roads.
Battery Protection: Low-Voltage Cut-Off
- For Daily Drivers: Set your cut-off to 12.2V or 12.4V for a healthy balance.
- For Hybrids and EVs: Flick us a message and we'll make sure you're set up right.
Quick Tips for a Pro Install
- Airbag Safety: Always run the cable behind the curtain airbag up the A-Pillar.
- Firmware Check: Ensure Parking Mode is toggled ON in your WOLFBOX settings menu.
- Need a Hand? Check out our Dash Cam Installer Directory to find an independent installer near you.
FAQ
Will using an OBD kit void my new car warranty?
Generally, no. You aren't cutting, splicing, or soldering any factory wiring looms, so it's considered a non-invasive accessory. Under Australian Consumer Law a manufacturer has to show that an accessory actually caused a specific fault before refusing that repair, so a clean OBD install is the lowest-risk method we recommend.
How do I know if I need 3A or 4A?
Check the label on the camera. If you're running a 3-channel system (G900 Pro or TriPro), you'll need the 4A High-Power kit.
Last updated: February 2026.
Related Reading
Commercial disclosure: The Dash Cam Guys sells the WOLFBOX hardwire kits recommended on this page, so read this as a retailer's guide to its own range rather than an independent survey of the market. No brand paid for, sponsored or supplied anything for this guide. We buy the cameras we review out of our own stock, the same stock we sell. Kit specifications are WOLFBOX's own published figures and are manufacturer claims unless we say otherwise. Where we cite our own bench testing, the method and its limits are set out in full on the linked test page. If a specification, a feature or a claim on this page is wrong or has gone out of date, tell us and we will correct it.