• Vantrue VP05 Voltage Display Hardwire Kit – USB-C 3-Level Protection

Vantrue VP05 Voltage Display Hardwire Kit – USB-C 3-Level Protection

In stock
  • Fully secure checkout
  • Local Australian Stock
  • "No-Worries" Returns
$53.00
$53.00 $55.99
Up to 5% off

Unlock Parking Mode Safely with Vantrue VP05 Kit

USB-C hardwire power with real-time voltage protection

Leave your car at the station without worry. Hardwiring with the Vantrue VP05 keeps your dash cam powered for motion and impact events, then cuts power at your chosen threshold so your starter battery stays healthy. The built-in screen shows live voltage, making setup and troubleshooting clearer on install day and months later.

Trusted in Australia: We’re an authorised AU reseller. Orders ship from Melbourne within 48 hours. You get the full manufacturer warranty term on this accessory, with the option to extend to 18 months by registering, plus local technical support and a 30-Day No-Worries return.

Who This Isn’t For: If your dash cam does not take 5V via USB-C or lacks support for parking mode via ACC/B+ sensing, this kit isn’t the right fit. Consider a model-specific hardwire lead or an OBD solution instead.

DCG Score & Highlights

What We Love

  • Clear, real-time voltage display for faster installs and diagnostics
  • Three selectable low-voltage cut-off levels to protect your battery
  • USB-C output suits modern single, dual or triple-channel cams
  • 12–24V input for cars, utes and light trucks
  • ACC lead enables Parking Mode switching the moment you turn the key
  • Neat ~3.5 m total run for tidy, hidden routing

What Could Be Better

  • Only three voltage steps, so fine-tuning is limited
  • No timer mode for time-based shutoff preferences

Why Parking Protection Matters

True parking protection needs constant 5V power, ACC sensing so the camera knows when you’re driving or parked, and proper battery safeguarding. A purpose-built hardwire kit like the VP05 delivers all three, helping capture that crucial car-park bump while looking after your vehicle battery.

Top Benefits

  • Battery-safe operation: Choose from three cut-off voltages so your camera powers down before cranking becomes a struggle.
  • Modern USB-C compatibility: Clean, regulated 5V output up to 2.5 A for today’s USB-C dash cams.
  • Instant mode switching: Dedicated ACC, B+ and GND leads let compatible cams enable Parking Mode as soon as the ignition goes off.
  • Fits more vehicles: Works with 12V and 24V systems, from small hatches to light commercial vehicles.
  • Faster troubleshooting: On-module voltage readout confirms you’ve tapped the right fuses at a glance.
  • Tidy installs: Approximately 3.5 m total cable length to route up A-pillars and behind trims.

Upgrade Your Parking Protection Today

Add the Vantrue VP05 Hardwire Kit to cart and book our installer for a clean fuse-tap fit with the right adapters. We ship from Melbourne within 48 hours and back you with local support plus 30-Day No-Worries returns.

Specifications

FAQ

  • Q: Will this work with non-Vantrue cameras? → A: Yes, if your camera takes 5V via USB-C and supports Parking Mode triggered by ACC/B+ signals.
  • Q: Do I need fuse taps? → A: Yes. Choose the correct style for your car’s fuse box (ATO, Mini, Micro2, etc.). We can supply a kit or advise the right type.
  • Q: Which cut-off level should I use? → A: Start with the middle value. If you do short trips or leave the car parked for days, pick the higher cut-off to be gentler on the battery.
  • Q: Does it include a timer? → A: No. It uses voltage-based protection only. If you prefer time-based shutoff, select a timer-equipped kit.
  • Q: OBD vs hardwire? → A: OBD can be quicker but often lacks true ACC sensing. Hardwiring with the VP05 provides ACC so compatible cams switch modes instantly.
Vantrue VP05 Voltage Display Hardwire Kit – USB-C 3-Level Protection

$53.00

Questions about this product?
Don't be a stranger.

Get in touch

Exclusive discounts, just for you. Sign up now.