Mirror Dash Cam Cable Cover for WOLFBOX G900 Pro & TriPro - 3D Printed in UV-Stable Black ASA

Model
$22.00
$22.00 RRP
Tax included. Shipping calculated at checkout.
  • Fully secure checkout
  • Local Australian Stock
  • "No-Worries" Returns
Need it installed?

Find a local installer near you via 'Find an Installer'

Seen it cheaper?

We'll match it!* Reach out to us via Live Chat

Hide the Wires Behind Your Mirror Dash Cam. A 3D Printed Cable Cover for the WOLFBOX G900 Pro and G900 TriPro

A WOLFBOX mirror dash cam looks the part from the driver's seat, right up until you notice the bundle of cables hanging off the top of it. Power, GPS, Rear Camera and, on the TriPro, a third camera lead all leave the mirror and head for the roof lining, and on most cars they stay on show the whole way. It is the one bit of the install that never looks finished. So we fixed it.

Trust the basics: Printed by The Dash Cam Guys in Melbourne, shipped within 24 hours*. You get a 12-month warranty, local technical support from people who work with these mirrors every day, and our 30-Day No-Worries returns.

Who This Isn't For: This cover is shaped around the WOLFBOX G900 Pro and G900 TriPro only, so it will not fit the original G900, the G930, the G840 series or any other brand of mirror cam. If your cables already disappear straight into the headliner behind the mirror, you do not need this part. It is for G900 Pro and TriPro owners who can still see their wiring.

DCG Highlights

What We Love

  • Two versions, one for the G900 Pro and one for the G900 TriPro, because the two cable sets are physically different and a one-size cover would fit neither properly
  • Printed in black ASA rather than PLA, so it holds its shape in a car parked in the Australian sun
  • ASA is UV stable, so the cover will not go chalky, grey or brittle sitting behind the windscreen
  • Matte black finish that sits in with the black body of the WOLFBOX mirror
  • Tidies the power and camera leads into one clean run instead of a loose bundle
  • Printed in Melbourne by a small Aussie team, so if you have feedback on the fit, it goes straight to the people at the printer

Good to Know

  • Choose the variant that matches your mirror. The G900 Pro cover will not fit a TriPro, and the TriPro cover will not fit a Pro.
  • It is 3D printed, so up close you will see fine layer lines. From the driver's seat, you will see a tidy windscreen instead.
  • The cover hides the cables, it does not route them for you. You still tuck the leads into the headliner and pillar trim as part of a normal install.
  • The mirror dash cam, cables and mounting bracket are not included. For a secure fit we recommend the OEM-Style Mirror Bracket (see below).

Why Black ASA Matters for a Part That Lives on Your Windscreen

The plastic matters more than the shape. A part behind the windscreen gets cooked every summer: cabin air in a parked car can climb towards 60°C, and surfaces in direct sun get hotter still. PLA, the most common 3D printing filament, starts to soften around 60°C, which is exactly how cheap printed car parts end up drooping. PETG handles more heat, but still struggles with long spells of UV.

ASA (acrylonitrile styrene acrylate) was developed for outdoor and automotive use. Its glass transition sits around 100°C, well above what a cabin reaches, and it is built to resist UV, so it keeps its colour and strength instead of fading and turning brittle. The trade-off is that ASA is harder to print, which is why we print it ourselves rather than selling you a file and wishing you luck.

Top Benefits

  • A finished-looking install: Covers the exposed cables behind your WOLFBOX mirror so the setup looks factory rather than fitted.
  • Holds its shape in summer: Black ASA keeps its form at cabin temperatures that would soften a PLA print.
  • Stays black for years: UV-stable ASA resists the fading and chalking you get from sunlight through the glass.
  • A fit made for your model: Separate covers for the G900 Pro and G900 TriPro mean no gaps and no filing to make it sit right.
  • Less to catch your eye: No loose cables in your peripheral vision while you drive.
  • Support from the people who make it: Questions about the fit go to the team, not a marketplace seller overseas.

How It Secures to Your Mirror

The cover is held in place by being sandwiched between the mounting plate and the back of your WOLFBOX mirror. For a secure fit, we recommend pairing it with our OEM-Style Mirror Bracket, which clamps the cover firmly between the plate and the mirror so it stays put on rough Aussie roads.

Using the rubber straps to fit your WOLFBOX over your original mirror? The cover will sit between the two, but the straps don't hold it securely, so we don't recommend it for a strap-on install.

Fitment & Compatibility

  • G900 Pro variant: The WOLFBOX G900 Pro 12-inch mirror dash cam, including the G900 Pro-N.
  • G900 TriPro variant: The WOLFBOX G900 TriPro Cabin and G900 TriPro Bumper mirror dash cams.
  • Material: 3D printed black ASA, matte finish.
  • Not compatible with: The original WOLFBOX G900, the G930, the G840 and G850 series, or other brands of mirror dash cam.

Not sure which mirror you have? Check the original box, or send a photo to support@dashcamguys.com.au and we will tell you straight.

Finish Your Mirror Cam Install Properly

Pick your model, add the cable cover to your cart, and give your WOLFBOX mirror the clean look it should have had from day one. Need the bracket to go with it? Our OEM-style mirror bracket holds the G900 Pro and TriPro firm on rough Aussie roads. Ships from Melbourne within 24 hours*, covered by our 30-Day No-Worries returns. Got a question about your car? Give us a call, we're happy to guide you.

Specifications

Warranty
  • 12 Months

FAQ

  • Q: Which version do I need? A: Match it to your mirror. The G900 Pro version fits the G900 Pro and G900 Pro-N. The G900 TriPro version fits both the TriPro Cabin and TriPro Bumper. The two mirrors are shaped differently, so the covers are not interchangeable. If you are not sure which you have, check the original box or send us a photo.
  • Q: Can I use it with the rubber straps over my original mirror? A: It will sit between the WOLFBOX and your original mirror, but the straps don't hold it securely, so we don't recommend it. For a firm fit, pair it with our OEM-Style Mirror Bracket. The cover sits between the bracket's mounting plate and the mirror, so it's clamped in place.
  • Q: Will it fit my original WOLFBOX G900? A: No. The original G900 is an older, discontinued model with a different body. This cover is designed around the current G900 Pro and G900 TriPro only.
  • Q: Will a 3D printed part melt in a hot car? A: Not this one. We print it in ASA, which has a glass transition temperature of around 100°C, well above the air temperature in a parked car. Cheap prints sag because they are usually made from PLA, which starts to soften around 60°C.
  • Q: Why ASA instead of PLA or PETG? A: ASA is made for sun and heat. It resists UV, so it does not fade or go brittle behind the windscreen, and it handles far more heat than PLA. It is harder to print, which is the main reason most printed parts are not made from it.
  • Q: Does it come with the cables or the mirror? A: No. It is the cover only. Your WOLFBOX mirror dash cam and its cables are sold separately.
  • Q: I found the print file online. Why buy one? A: You are welcome to print your own. Ours is printed in ASA on printers set up for it and covered by a 12-month warranty and our 30-Day No-Worries returns. If it does not fit, you deal with us, not your printer.
  • Q: What if it does not fit my install? A: Email support@dashcamguys.com.au with a photo of the back of your mirror and how it is mounted. We designed it, so we can usually tell you quickly whether it is the variant, the mount or something else.
Mirror Dash Cam Cable Cover for WOLFBOX G900 Pro & TriPro - 3D Printed in UV-Stable Black ASA

$22.00

Questions about this product?
Don't be a stranger.

Get in touch

Exclusive discounts, just for you. Sign up now.