The "Portable" Protection Pack | 2.7K Front + Cabin Dash Cam, Suction Mount & 128GB (RR1 Pack)

Take Your Dash Cam From Car to Car With No Hardwiring. The Portable Protection Pack Records 2.7K Ahead and 1080p Infrared in the Cabin From a Suction Mount and a 12V Socket

Most dash cams are fitted once and stay put, with an adhesive pad on the glass and a cable wired into the fuse box. That is no use if you drive a different vehicle every week. A work van you hand back, a hire car you cannot modify and the family's second car all need a camera that goes up quickly and comes down again. The Portable Protection Pack (RR1) pairs the Vantrue N2X front and cabin dash cam with a GPS suction mount and a 128GB card.

Want the full camera detail before you buy? It is all on the Vantrue N2X front and cabin dash cam page, or read our Vantrue N2X review.

Trusted AU store: We're an authorised Australian reseller, shipping from Melbourne within 24 hours^*. You get an 18-month warranty on the camera with no product registration required, a 12-month warranty on the accessories, local technical support, and our 30-Day No-Worries returns.

Who This Isn't For: From a 12V socket, this pack records while you drive, not while parked, because most sockets switch off with the ignition. If the camera will live in one car, buy the Vantrue N2X on its own with a Vantrue VP05 hardwire kit. The N2X cannot take a rear camera, so for the road behind look at the Vantrue N4 Pro. This pack suits drivers who change vehicles often.

DCG Highlights

What We Love

• A Vantrue GPS suction mount instead of an adhesive pad, so the camera lifts off one windscreen and goes onto the next in seconds
• GPS is built into the suction mount, so speed and location are still stamped on every clip with no separate module to carry
• An adjustable ball-head on the mount, which lets you level the camera when every vehicle has a different windscreen angle
• Power comes from the car charger in the Vantrue N2X box, with a built-in 3.5m USB-C cable, so there is no fuse box work in a vehicle that is not yours
• A 2.7K front camera (2592 x 1944) on a Sony STARVIS 2 IMX675 sensor per Vantrue, recording alongside the 1080p cabin camera
• Four infrared LEDs on the cabin camera, which keep faces and hands visible at night without a cabin light
• A Vantrue 128GB High Endurance microSD card in the pack, so the camera can record on the first drive
• Dual-band Wi-Fi that runs on 5GHz by default, so a clip reaches your phone quickly when a fleet manager or hire desk asks what happened

Good to Know

• Suction can release after a long hot day. Clean the glass and the cup before you fit it, and check it now and then.
• A suction mount sits lower and is more visible from outside the car than a low-profile adhesive mount.
• Parking mode needs constant power from a Vantrue hardwire kit or OBD cable, sold separately. A 12V socket that switches off with the ignition will not run it.
• If you drive rideshare in Victoria or Queensland, transport rules restrict cameras that record inside the car. Read our guide to rideshare dash cam laws in Australia before you use the cabin camera for rideshare work.

Why Choose a Suction Mount and 12V Power Over a Permanent Install?

A suction mount and 12V power are the right choice when the camera has to follow the driver rather than stay with the car. A permanent install uses an adhesive pad that is meant to stay on the glass and, for parking mode, a hardwire kit tapped into the fuse box. That works well in a car you own and keep. It fails the moment you swap vehicles, because the mount and the wiring stay behind.

The Portable Protection Pack removes both ties. The Vantrue GPS suction mount holds the Vantrue N2X on the glass with a suction cup, and the camera's car charger plugs into the 12V socket. The trade-off is real. You give up parking mode, the power cable is harder to hide, and suction needs a clean windscreen and an occasional check in summer. We compare the two approaches in our guide to adhesive and suction cup dash cam mounts.

Top Benefits

• One camera, every vehicle: The suction mount moves between a work van, a hire car and the family car without an adhesive pad.
• Nothing to undo at hand-back: There is no adhesive pad on the glass and no fuse tap behind the dash, only a suction cup and a plug.
• Both sides of the story: The road ahead and the cabin record together, so a dispute inside the vehicle has footage behind it.
• Night shifts covered: Infrared LEDs keep the cabin readable after dark without switching on a light.
• Proof of where and how fast: GPS in the suction mount logs speed and location onto every clip.
• Recording from day one: The 128GB card is in the pack, so there is no second order before the camera can record.

How Does the Portable Protection Pack Install?

1. Insert the Vantrue 128GB card into the Vantrue N2X and format it in the camera.
2. Clean the windscreen and the suction cup, then fix the Vantrue GPS suction mount to the glass beside the rear-view mirror.
3. Fit the camera to the mount so the front camera faces the road and the cabin camera faces the seats, and level it with the ball-head.
4. Plug the car charger's USB-C cable into the mount and the charger into the 12V socket, then set the date, time zone and language.
5. To change vehicles, unplug the charger, release the suction cup and take the camera, mount and cable with you.

Nothing is wired in and no tools are needed. If the camera is staying in one vehicle for a while, the pry tool and cable clip in the camera box help you tuck the 3.5m cable along the headlining and down the pillar.

What's in the Portable Protection Pack?

• 1 x Vantrue N2X 2-CH front and infrared cabin dash cam (SKU N2X), in its own box with the 12V car charger and built-in 3.5m USB-C cable, plus the adhesive GPS mount and base. The full box list is on the camera page.
• 1 x Vantrue GPS suction mount for the N2X, N4S, N5S and N4PS, Type-C (SKU VANSUCN5S)
• 1 x Vantrue 128GB High Endurance microSD card (SKU VAN128GB), with a microSD to SD adapter
• Not included: hardwire kit or OBD power cable, CPL filter, wireless remote, LTE module. The Vantrue N2X has no rear camera input.

Add Yours Today

Add the Portable Protection Pack to your cart and the camera, suction mount and card turn up together. If one vehicle becomes your regular drive, the Vantrue VP04 OBD power cable adds parking mode power in cars that keep the OBD port live, and a Vantrue 256GB High Endurance microSD card gives parking mode more room. We ship from Melbourne within 24 hours^*, backed by our 30-Day No-Worries returns. We do not install cameras ourselves, but you can find someone local in our directory of independent installers. They are independent businesses, so you book and contract directly with them.

Last updated: October 2026

🔍 Still deciding? Read our Vantrue N2X review, or compare the range in our Vantrue dash cam comparison.

📖 Own this already? Read the Vantrue N2X manual and troubleshooting guide.